LAMPE Gully-sealing plates
in three different designs, to cover road gullies.
Sometimes it is necessary to seal a gully temporary in order to prevent the come-in of dangerous or hazardous liquids into the canal system.
The canals to be protected may be sewers and storm sewers, through which contaminated wastewater can arrive into open waters or purification plants.
In order to perform this work in an easy way we developed the LAMPE Gully-sealing plates which are fast and simple to operate. Simply put it on, lock it and the gully is closed.
Advantages:
- The operation is quick and easy, the gully grid remains on its place in the shaft. The utilization of the gully-sealing plate is also possible under adverse conditions, slight soiling at the gully, snow and ice or a frozen up grid are no obstacle for a quick action.
- Our gully-sealing plate are low-cost, as they are working purely mechanical and no other medium like e.g. compressed air or CO2 are necessary for its application.
- The devises are safe. The gully remains closed during the operation – no danger can arise through the opening gully.
LAMPE Gully-sealing plate – a safe, quick and simply to be applied system
|
Leak-sealing cushions
with pipings and fastening bows to make tight leaks in tanks or pipe lines.
Description:
 The basic device is made of neoprene, it is well resistant against chemicals and has a piping each on the left and on the right side . The fastening bow is fixed and locked on this piping.
Advantages:
This new construction of a Leak-sealing cushion offers many advantages:
- In the event that the material of the basic device would be damaged during an operation, only the basic device has to be replaced.
- The stable fastening bows made of brass, non-sparking, permit the fastening by one belt and thus simplify the utilization.
- With these fastening bows there can be fastened devices of different sizes, i.e. of different lengths, very easy. Also our leak bandages (cushions available with the dimensions 120 x 22 and 200 x 22 cm ) can thus be fixed in an easy and fast way.
- Of course the cushion is filled with the normal 1 bar safety fitting of the LAMPE system. With one filling fitting and the related hose there can be filled thus very easy and without danger of confusion air lifters, the LAMPE-LIFTERs of the series 1 bar, sewer sealing cushions with 1 bar operating pressure and Leak-sealing cushions .
|
